Freezer Storage Racks
Freezer storage racks help you make efficient use of space in chest and upright freezers, deep freezers, undercounter and ultra-low temperature freezers. To help you organize and optimize your storage, freezer storage racks, towers and shelf kits can be modular or color-coded for easy identification. Freezer baskets can be made from stainless steel, non-corrosive aluminum, clear acrylic or polycarbonate.
Freezer door opening time is typically limited to help maintain freezer temperatures, and racks can help users quickly access specific samples. Racks also allow users to temporarily remove a section of samples from the freezer without exposing the remainder to unwanted temperature changes.
Freezer racks may have horizontal access (for upright freezers) or vertical openings (for chest freezers). Some are wire baskets or sliding drawers and some have wheels to facilitate movement. Freezer storage racks may also have locks for security. For liquid nitrogen storage, racks may be “canes” or “straws” that hold multiple tubes in an upright position.
For optimal storage, choose racks designed to fit your particular freezer model or product. Racks are also made to fit specific sizes of freezer boxes. Most freezer boxes are roughly 5 inches square, but heights range from 2 to 5 inches depending on the size of tubes they hold.
Andwin Scientific STAINLESS STEEL RACKS FOR 50-P
Stainless steel racks for 50-place boxes, 6-1/4 in. L x 5-7/8 ft. W x 25-3/8 in. H Compartments (L x H) 1 x 11
Alkali Scientific Upright Freezer Rack for 25 Place Slide Boxes, 3 x 7 Configuration, 21 Box Capacity
For 25 Place Slide Boxes Our Freezer Storage Racks are constructed of high quality, corrosion resistant stainless steel. Handles at both ends accommodate freezers with right or left handed doors. Our freezer racks have been configured to fit all major ultra low ( 80°) freezers on the market; racks are designed for ultra low upright freezers. Racks are for 25 Place Slide Boxes. Drawer Racks allow an easy access to fewer microtube boxes at a time thus protecting other samples in the rack from warming up. Constructed of corrosion resistant stainsteel. Dimensions L x H x W: 11 1/2 x 12 x 6 inch (291.5 x 304.5 x 152 mm) Compartment Dimensions l x h x w: 3 11/16 x 1 1/2 x 5 9/16 inch (92.5 x 38 x 141mm) *Security lock device is ordered separately.
Alkali Scientific™ Upright Freezer Racks for Large 3.75″ Boxes- Rack Only- 3 Boxes Deep x 4 Boxes High
These Upright Freezer Racks for 3.75" standard boxes offer convenient storage of samples in an organized format. Constructed of corrosion resistant stainless steel, these freezer racks include durable handles for easy removal from freezer. Dimensions L x H x W: 18 3/8 x 16 1/16 x 5 15/16 (315.5 x 408 x 151mm)Compartment Dimensions: 5 7/8 x 4 x 5 13/16 inch (149 x 101 x 148mm)
Alkali Scientific™ Upright Stainless-Steel Freezer Racks for 3” Boxes- Rack Only- 2 Boxes Deep x 3 Boxes High
For Standard 3″ Boxes2×3 Configuration Constructed of corrosion resistant stainless steel Racks fit standard 3" cardboard, plastic, or metal boxes Security lock devices available for each rack Freezer Storage Racks are constructed of high-quality, corrosion resistant stainless steel. Handles at both ends accommodate freezers with right or left-hand doors. Our freezer racks have been configured to fit all major ultra-low (-80°) freezers on the market; racks are designed for ultra-low upright freezers. Dimensions (DxWxH): 11 1/2 x 5 1/2 x 9 3/8 inches (292 x 140 x 238mm)Compartment Dimensions: 5 3/8 x 5 7/16 x 3 1/16 inches (137 x 140 x 78mm)
Alkali Scientific™ Upright Freezer Rack for SBS Formatted Boxes (Micronic, Fluidx, Abgene), 5x4 configuration, 20 Box Capacity
For Speciality Tube Racks (Micronic, Fluidx, Abgene)- H: 1 1/4″- 1 1/2″ (31.7-38.7mm) Our Freezer Storage Racks are constructed of high-quality, corrosion resistant stainless steel. Handles at both ends accommodate freezers with right or left handed doors. Our freezer racks have been configured to fit all major ultra low (-80°) freezers on the market; racks are designed for ultra low upright freezers. Removable clip can be adjusted so that the rack can hold both standard 5" and 4" boxes.Constructed of corrosion resistant stainless steel. Features: Modifiable Includes Handles Constructed of corrosion resistant stainless steel Dimensions (DxWxH): 18 1/4 x 5 7/16 x 6 5/8 inches (463 x 138 x 168mm)Compartment Dimensions: 3 7/16 x 5 1/8 x 1 9/16 inches (88 x 130 x 40mm)
Alkali Scientific™ Upright Freezer Racks for 96 Deep-Well Microtiter Plates and Microtube Racks with Locking Rod – Rack Only – 3 x 5, 15 Box Capacity
For 96 Deep-Well Microtiter PlatesFor Speciality Tube Racks (Matrix, Fluidx, Micronic)- H: 9/16″- 1 3/4″ (14.4-44.32mm) 3×5 Configuration Upright freezer racks are designed for storage of 96 Deep-Well Microtiter Plates and Microtube Racks. This freezer rack features a 5 high by 5 deep configuration for a total storage of 25 plates or microtube racks. These high-quality upright freezer racks include handles, are constructed of corrosion resistant stainless steel and offer convenient storage of samples in an organized format. Each rack compartment holds a single 96 deep-well microtiter plate or microtube rack/box. A locking rod is included with this freezer rack to provide added security to prevent plates or boxes from sliding out of the rack when moving the racks in and out of the freezer. Dimensions (DxWxH): 11 1/2 x 5 1/2 x 9 3/8 inches (292.5 x 140 x 237.5mm)Compartment Dimensions: 3 9/16 x 5 3/16 x 1 13/16 inches (91 x 130.5 x 45.7mm)
GNOSKO BIO INC 4x4 Clear Polymer Freezer Rack
ChillView freezer racks address common issues with stainless steel freezer boxes. ChillView racks are clear and don't frost, so they don't require gloves to handle. Everything can be seen when opening the door, greatly reducing the time and energy wasted when searching for something specific. Energy is also greatly reduced since ChillView racks transfer heat at approx. 100x less than the rate of stainless-steel boxes. ChillView also allows RFID tags to be read through the box to enable Gnosko Bio automated inventory management solutions. 4 shelves, 4 boxes deep.
Alkali Scientific Upright Freezer Rack for 25 Place Slide Boxes, 4 x 6 Configuration, 24 Box Capacity
For 25 Place Slide Boxes Our Freezer Storage Racks are constructed of high quality, corrosion resistant stainless steel. Handles at both ends accommodate freezers with right or left handed doors. Our freezer racks have been configured to fit all major ultra low ( 80°) freezers on the market; racks are designed for ultra low upright freezers. Racks are for 25 Place Slide Boxes. Drawer Racks allow an easy access to fewer microtube boxes at a time thus protecting other samples in the rack from warming up. Constructed of corrosion resistant stainsteel. Dimensions L x H x W: 15 3/16 x 10 3/16 x 6 inch (385 x 259 x 152 mm) Compartment Dimensions l x h x w: 3 11/16 x 1 1/2 x 5 9/16 inch (92.5 x 38 x 141mm) *Security lock device is ordered separately.
Electron Microscopy Sciences Visio-Tek™ Visio-Tek Microscope Boom Stand
Vertical/desktop rack that utilizes an adjustable sliding horizontal boom arm with up to 25 cm reach and 360° rotational capability. It is ideal for inspection applications where the ability to extend over and across a specimen is required.
Alkali Scientific™ Upright Freezer Racks for 96 Deep-Well Microtiter Plates and Microtube Racks with Locking Rod – Rack Only – 7 x 6, 42 Box Capacity
For 96 Deep-Well Microtiter PlatesFor Speciality Tube Racks (Matrix, Fluidx, Micronic)- H: 9/16″- 1 3/4″ (14.4-44.32mm) 7×6 Configuration Upright freezer racks are designed for storage of 96 Deep-Well Microtiter Plates and Microtube Racks. This freezer rack features a 7 high by 6 deep configuration for a total storage of 42 plates or microtube racks. These high-quality upright freezer racks include handles, are constructed of corrosion resistant stainless steel and offer convenient storage of samples in an organized format. Each rack compartment holds a single 96 deep-well microtiter plate or microtube rack/box. A locking rod is included with this freezer rack to provide added security to prevent plates or boxes from sliding out of the rack when moving the racks in and out of the freezer. Dimensions (DxWxH): 26 1/8 x 5 1/2 x 11 3/16 inches (663.7 x 140 x 283.5mm)Compartment Dimensions: 3 9/16 x 5 3/16 x 1 13/16 inches (91 x 130.5 x 45.7mm)
Alkali Scientific™ Upright Freezer Drawer Rack for 96 Deep-Well Microtiter Boxes; 6 x 7 Configuration, 42 Box Capacity
For 96 Deep-Well Microtiter PlatesFor Speciality Tube Racks (Matrix, Micronic,Fluidx) H: 9/16″-1 3/4″ (14.4-44.9mm) Our Upright Freezer Drawer Racks are constructed of high-quality, corrosion resistant stainless steel. Durable stainless steel freezer racks facilitate organization and maximize valuable storage space.. Handles at both ends accommodate freezers with right or left handed doors. Racks are for 96 Deep-Well Microtiter Boxes. Our freezer racks have been configured to fit all major ultra low (-80°) freezers on the market; racks are designed for ultra low upright freezers. Dimensions (DxWxH): 21 3/4 x 5 7/16 x 14 1/8 inches (552 x 138 x 358mm)Compartment Dimensions (l x h x w): 3 1/2 x 1 3/4 x 5 1/8 inch (89.4 x 45.4 x 130mm)
MSC Sunex Tools Service Cart, 350 Lb Capacity, 16 x 30 in, Steel
Sunex Tools service cart is designed for various workshop and garage applications, offering robust storage and transport capabilities. This durable steel cart features a substantial 350 Lb capacity, a single drawer for secure storage, and two open shelves for easy access to tools and parts. Its compact design and red finish make it a functional and visually appealing addition to any workspace.
- 350 Lb capacity
- Dimensions: 16 in wide x 30 in long x 35-1/4 in high
- Constructed from steel
- Equipped with 1 drawer
- Includes 2 shelves
- Red finish
Alkali Scientific™ Upright Stainless-Steel Freezer Racks for 3” Boxes- Rack Only- 2 Boxes Deep x 2 Boxes High
For Standard 3″ Boxes Constructed of corrosion resistant stainless steel Racks fit standard 3" cardboard, plastic, or metal boxes Security lock devices available for each rack Freezer Storage Racks are constructed of high-quality, corrosion resistant stainless steel. Handles at both ends accommodate freezers with right or left-hand doors. Our freezer racks have been configured to fit all major ultra-low (-80°) freezers on the market; racks are designed for ultra-low upright freezers. Bottom of Form Dimensions (DxWxH): 11 1/2 x 5 1/2 x 6 5/8 inches (292 x 140 x 168mm)Compartment Dimensions: 5 3/8 x 5 1/2 x 3 1/16 inches (137 x 140 x 78mm)
![Cambridge Isotope Laboratories ( /-) Benzo[A]pyrene-R-7 t-8 t-9 t-10-tetrahydro-tetrol (ring-13C6 99%) 100 ug/mL in methanol 1 2 mL](https://assets.fishersci.com/TFS-Assets/CCG/product-images/5000167891.png-250.jpg)
Cambridge Isotope Laboratories ( /-) Benzo[A]pyrene-R-7 t-8 t-9 t-10-tetrahydro-tetrol (ring-13C6 99%) 100 ug/mL in methanol 1 2 mL
( /-) Benzo[A]pyrene-R-7 t-8 t-9 t-10-tetrahydro-tetrol (ring-13C6 99%) 100 ug/mL in methanol 1 2 mL